Class Snap

Class Snap

Monday, March 31, 2014

Cisco 7941 - When you try to register as SIP it gives you "UNPROVISIONED"

After entering all the relevant commands in CME for the phone to register as SIP it still gives you the "UNPROVISIONED"... try deleting the "authenticate register" command and say "create profile" and it should work.... 

SIP Phone Registration to CME (Configuration) 

voice service voip 
allow-connections h323 to h323 
allow-connections h323 to sip 
allow-connections sip to h323 
allow-connections sip to sip 
sip 
bind control source-interface Loopback0 (Optional, but it is better to bind the traffic) 
bind media source-interface Loopback0 (Optional, but it is better to bind the traffic) 
registrar server expires max 300 min 60 

voice register global 
mode cme 
source-address 177.3.254.1 port 5060 
max-dn 25 
max-pool 10 
load 7970 SIP70.8-3-1S 
authenticate register 
tftp-path flash: 
create profile sync 001513024159287A 

voice register dn 1 
number 3001 
voice register dn 2 
number 3002 
voice register dn 3 
number 3003 
voice register dn 4 
number 3004 

voice register pool 1 
id mac 0024.C442.D5E7 
type 7970 
number 1 dn 1 
username cisco password cisco 
voice register pool 2 
id mac 0024.C442.D5E3 
type 7970 
number 1 dn 2 
username cisco password cisco 

voice register pool 3 
id mac 0024.C442.D620 
type 7970 
number 1 dn 3 
username cisco password cisco 

voice register pool 4 
id mac 0024.C442.D5ED 
type 7970 
number 1 dn 4 
username cisco password cisco 

tftp-server flash:cnu70.8-3-0-50.sbn 
tftp-server flash:apps70.8-3-0-50.sbn 
tftp-server flash:cvm70sip.8-3-0-50.sbn 
tftp-server flash:dsp70.8-3-0-50.sbn 
tftp-server flash:jar70sip.8-3-0-50.sbn 
tftp-server flash:SIP70.8-3-1S.loads 
tftp-server flash:term70.default.loads

No comments:

Post a Comment