IP Ninjas: Cisco Spark Hybrid - What the Portal Looks like

Class Snap

Wednesday, August 10, 2016

Cisco Spark Hybrid - What the Portal Looks like

Posted by Cisco Kiosk Ideas at Wednesday, August 10, 2016

Email This BlogThis!Share to Twitter Share to Facebook Share to Pinterest

No comments:

About Me

Cisco Kiosk Ideas

View my complete profile

Search This Blog

Blog Archive

► 2018 (4)
- ► February (4)

▼ 2016 (2)
- ▼ August (2)
  - Cisco CCIE Collaboration Bootcamp - Sept 10 - Nov ...
  - Cisco Spark Hybrid - What the Portal Looks like

► 2015 (4)
- ► April (4)

► 2014 (47)
- ► July (3)
- ► April (7)
- ► March (37)

Popular Posts

Integrating CUCM with CUE - JTAPI Login Failed. Error while determining CCM Version-1

..was testing the CUE (Ver. 7.0.6) integration with CUCM ver 7.0.1, all went well however when I key in the jtapi username and password (cr...
phones don't register to the subscriber by auto register but register to the pub... cucm pub and sub don't sync

if you tried the utils dbreplication repair all or the utils dbreplication reset all and are still stuck with a different replication count...
UCCX 11.5 - Second Node Installation Error "Configuration validation with UCCXSRV failed. Configured first node UCCXSRV is not a first node -is UCCXSRV entered correctly? -is UCCXSRV the correct first node for this node"

To summarize: Make sure if you reset the security password on the Publisher (even if it's right) using the procedure below and then try...
Overall UCS Connectivity between the VM's to the FI's

The above pic on shows one Blade Server on a Chassis connected to one side of the Fabric... the other side of the Fabric would have the...
Understanding Gatekeepers, Gatekeeper Call Routing & CUBE - Part 2.3/3

Now what happens if a tech-prefix is found by the gatekeeper for an incoming call but the GK is not able to match the remainder of the numb...
The %IP-3-LOOPPAK: Looping packet detected and dropped error message is received because of a looping packet that has been detected.

A common cause is a misconfiguration of an IP helper address. The helper address should be the same address as that of the server of the in...
How to test your FXO ports to see if they have an voltage coming in from the PSTN

test voice port 0/0/0 si-reg-read 29 1 // in the above command we are testing FXO voice port 0/0/0 if the output of the above command (ma...
Polycom IP6000/7000 Endpoint Registered to Cisco CUCM - Is the Polycom Endpoint able to use Cisco CUCM's Conference Resources to enable greater than 3 Party Conf. Calls (Ad-Hoc) or MeetMe

Question: Can the Polycom EndPoint IP6000/7000 use Centralized Conferencing Resources when registered to CUCM. Answer: No SoundStation...
Understanding Gatekeepers, Gatekeeper Call Routing & CUBE - Part 1/3

So what is a Gatekeeper and what do you basically need Gatekeepers for?, well those are some of the most primitive questions I'd pres...
Cisco Unified Personal Communicator ; Unable to switch between the "Deskphone" and "Softphone' iconsin personal communicator......stuck on one capability

Basically, the user is unable to shift between the deskphone and softphone icons on the CUPC client... so like if he logs in and has the De...